The Study of the Flexible Capacity of the Cross-Section of UHPC–Brick Masonry Composite Beams

This paper proposes a method for modifying brick masonry walls using ultra-high-performance concrete (UHPC) to effectively reduce the beam section width in composite members. First, a detailed finite element model of UHPC–brick masonry composite beams was established using the finite element software ABAQUS 2022 and validated through comparison with the existing literature. Then, the effects of factors such as the tensile reinforcement ratio, UHPC layer thickness, and UHPC strength grade on the load–midspan deflection curve of composite members were analyzed, along with a study of the bending performance under vertical loads. Based on the results of the finite element analysis, a calculation formula for the positive section bending capacity of UHPC–brick masonry composite beams was proposed. The study found that longitudinal tensile reinforcement yielded first, followed by the crushing of the compressive region of UHPC and brick masonry, resulting in overall bending failure. With the increase in the tensile reinforcement ratio and UHPC layer thickness, both the yield load and peak load significantly increased, while the UHPC layer thickness had a notable impact on the cracking load of the composite member. When the UHPC strength grade ranged from 150 MPa to 180 MPa, the bearing capacity of the composite member changed little. The proposed calculation method for bearing capacity correlated well with the finite element results, providing a theoretical basis for the design and analysis of UHPC–brick masonry composite beams.

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.