0
  • DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

Auteur(s):




Médium: article de revue
Langue(s): anglais
Publié dans: Smart and Sustainable Built Environment, , n. 4, v. 10
Page(s): 702-710
DOI: 10.1108/sasbe-04-2020-0037
Abstrait:

Purpose

The purpose of the study is regarding the development of eco-oriented technologies for obtaining the building gypsum materials with the involvement of industrial by-products or waste.

Design/methodology/approach

The scanning electron microscopy, X-ray microanalysis and IR spectral analysis were used to study the structure of gypsum matrix. The method of comparison of modified and unmodified gypsum matrix was used. Physical modeling of gypsum matrix crystallization is used to study changes in the morphology of hydration products.

Findings

The experimental results show that the addition of technical soot into a gypsum binder leads to a change in the morphology of crystalline hydrates of calcium sulfate dihydrate. Results of the scanning electron microscopy, X-ray microanalysis and IR spectral analysis confirm the change of physical and mechanical characteristics of the gypsum binder due to the structural modification of the gypsum matrix with ultrafine carbon soot. The achieved degree of the structural modification of the gypsum matrix is compatible with the results obtained when the gypsum binder was modified with dispersions of carbon nanotubes.

Originality/value

The morphology of the crystalline hydrates of the gypsum matrix with the addition of 0.04%, 0.06% and 1% of the carbon soot is characterized by the transition of the classical needle-like structure of gypsum dihydrate to the lamellar structure of increased density. One can observe the formation of intergrowths around ultrafine carbon soot particles. The studied carbon additive can improve strength characteristics of the gypsum matrix.

Structurae ne peut pas vous offrir cette publication en texte intégral pour l'instant. Le texte intégral est accessible chez l'éditeur. DOI: 10.1108/sasbe-04-2020-0037.
  • Informations
    sur cette fiche
  • Reference-ID
    10779823
  • Publié(e) le:
    12.05.2024
  • Modifié(e) le:
    12.05.2024
 
Structurae coopère avec
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine