Structural Performance of Cold-Formed Steel Face-to-Face Built-Up Channel Sections under Axial Compression at High Temperatures through Finite Element Modelling

This paper studies the structural performance of cold-formed steel (CFS) face-to-face (FTF) built-up channel sections subjected to axial compression at high temperatures. The material properties of G250 and G450 CFS channel sections at room and high temperatures were acquired from the literature, and the range of temperatures was from 20 to 700 °C. The influences of the section thickness, member length, screw number, and high temperature on the structural performance of such channel sections were examined via a comprehensive parametric analysis involving 576 validated finite element models. As the temperature increased from 20 to 700 °C, the mean axial capacity of the CFS-FTF built-up unlipped and lipped channel sections decreased by 88.9% and 90.2%, respectively. Based on the results of the parametric study, new design equations for the axial capacity of CFS-FTF built-up channel sections at high temperatures were proposed. The mean ratio of the EWM strengths calculated using the American standard (AISI 2016) and Australian/New Zealand standard (AS/NZS 2018) to the FE strengths was 0.77, while the mean ratio of the proposed design strengths to the FE strengths was 1.01. Finally, a reliability analysis was conducted, and it was found that the proposed equations could come close in predicting the axial capacity of CFS-FTF built-up channel sections at high temperatures.

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.