Strengthening of Reinforced Concrete Hydraulic Structures with External Reinforcement System Made of Carbon Fiber-Based Composite Materials with Development of Calculation Recommendations

During the long-term operation of hydraulic structures under the action of complex loads and impacts, non-design changes occur, which lead to a decrease in the bearing capacity and safety and, accordingly, to the need for structural reinforcements. Experiments were conducted to study the strengthening of reinforced concrete models of hydraulic structures with interblock construction joints (located in two directions) and with the low longitudinal reinforcement coefficients typical of hydraulic structures (μs = 0.0039 and μs = 0.0083), using the low concrete classes B15 and B25. These structures were strengthened using external reinforcement with carbon ribbons of the FibArm 530/300 type. The results revealed an increase in the bearing capacity (by 1.355- and 1.66-fold); accordingly, the high efficiency of this strengthening method for reinforced concrete hydraulic structures was proven. Using the results of these experiments, including the obtained special characteristic of the cracking of reinforced concrete structures and the results of studies by other authors, recommendations for calculations involving reinforced concrete hydraulic engineering structures strengthened with an external reinforcement system of carbon-fibre-based composite materials were developed and proposed. Carbon-fibre-based composite materials are used as elements of external reinforcement for building structures (unidirectional—tapes, bidirectional—meshes and fabrics). The calculation recommendations proposed by the authors can be taken into account for the creation of a regulatory framework for hydropower facilities, including hydroelectric power plants and pumped-storage power plants. They justify the use of an external reinforcement system made with carbon-fibre-based composite materials to strengthen hydraulic structures in operation and provide an increased level of safety for reinforced concrete structures and constructions.

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.