• DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

Strengthening of Precast RC Frame to Mitigate Progressive Collapse by Externally Bonded CFRP Sheets Anchored with HFRP Anchors

Auteur(s):


Médium: article de revue
Langue(s): en 
Publié dans: Advances in Civil Engineering, , v. 2018
Page(s): 1-11
DOI: 10.1155/2018/8098242
Abstrait:

Currently, the robustness of precast reinforced concrete frames is attracting wide attention. However, avoiding “strong beams and weak columns” during strengthening against progressive collapse is a key problem. To discuss this problem, an experimental study on two 1/2-scale precast frame subassemblages under a pushdown loading regime was carried out in this paper. One specimen was strengthened with carbon fibre-reinforced polymer (CFRP) sheets on the beam sides. The middle parts of the CFRP sheets were anchored with hybrid fibre-reinforced polymer (HFRP) anchors. Another specimen was not strengthened. The failure mechanisms, failure modes, and strengthening effect are discussed. The strengthening effect is very obvious in the early catenary action stage. No shearing failure develops on HFRP anchors, which proves that the anchoring method is effective. Based on the experimental results, analytical models and preventive strengthening design and construction measures to mitigate progressive collapse of the precast RC frame are proposed.

Copyright: © 2018 Jianwu Pan et al.
License:

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.

  • Informations
    sur cette fiche
  • Reference-ID
    10257475
  • Publié(e) le:
    29.12.2018
  • Modifié(e) le:
    02.06.2021