Strength Properties of Various Types of Fiber-Reinforced Concrete for Production of Driven Piles

This paper presents the results of static and dynamic tests of fiber-reinforced and unreinforced concrete samples under laboratory conditions. Concrete samples reinforced with steel and non steel fibers were tested. The dynamic tests were carried out on the stand by applying falling weight impacts on the concrete samples. The impact testing of samples included two stages of deformation: until the first defects appeared in the samples and until their complete destruction. The impact resistance of the samples was evaluated according to the energy input of the hammer with registration of the type, size and volume of the defects. It was revealed that the type of fibers has a different effect on the static and impact resistance of fiber concrete. Correlational dependencies used for predicting the strength and energy parameters of fiber concrete in their comparative evaluation have been obtained. It has been determined that the static strength and impact resistance of fiber concrete may not be identical, i.e., a high static strength in fiber concrete does not always provide a high impact resistance. The impact resistance of fiber concrete when tested before the first defects appear is always lower than when tested before complete failure.

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.