• DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

Static and Dynamic Brazilian Tests on Layered Slate considering the Bedding Directivity

Auteur(s):





Médium: article de revue
Langue(s): en 
Publié dans: Advances in Civil Engineering, , v. 2020
Page(s): 1-11
DOI: 10.1155/2020/8860558
Abstrait:

A layered rock usually exhibits strong anisotropy due to its layered structure. In order to study the anisotropic effect on its static and dynamic tensile properties, a medium strength anisotropy slate is chosen and tested in five groups of bedding plane dip angles. The dynamic tests were carried out by a split Hopkinson pressure bar (SHPB), and the failure process of rock samples is recorded by a high-speed camera. The failure mode and strength characteristic of the slate are analyzed. The static test results show that layered structure significantly affects the failure mode, and the influence of the bedding plane depends on the degree of anisotropy. The static and dynamic “tensile strength” exhibit the “U” type strength anisotropy. For samples in the same dip angle group, the “tensile strength” shows clear dynamic strengthening effect, and the growth rate is most significant at θ = 45°.

Copyright: © Xuefeng Ou et al. et al.
License:

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.

  • Informations
    sur cette fiche
  • Reference-ID
    10535978
  • Publié(e) le:
    01.01.2021
  • Modifié(e) le:
    19.02.2021