• DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

Partager

Suivre

Smart wireless sensing and assessment for civil infrastructure

  1. An, Yun-Kyu / Sohn, Hoon (2010): Instantaneous crack detection under varying temperature and static loading conditions. Dans: Structural Control and Health Monitoring, v. 17, n. 7 (novembre 2010), pp. .

    https://doi.org/10.1002/stc.394

  2. Baptista F.G. (2009), "A New Impedance Measurement System for PZT-Based Structural Health Monitoring" in IEEE Transactions on Instrumentation and Measurement, v. 58 n. 10, Institute of Electrical and Electronics Engineers (IEEE), p. 3602-3608

    https://doi.org/10.1109/TIM.2009.2018693

  3. Chaudhry Z. (1994), "Damage Detection Using Neural Networks: An Initial Experimental Study on Debonded Beams" in Journal of Intelligent Material Systems and Structures, v. 5 n. 4, SAGE Publications, p. 585-589

    https://doi.org/10.1177/1045389X9400500416

  4. Cho, S. (2011). Structural health monitoring of cable-stayed bridge using wireless smart sensors.PhD dissertation. KAIST, Korea.
  5. Cho Soojin (2010), "Structural health monitoring of a cable-stayed bridge using wireless smart sensor technology: data analyses" in Smart Structures and Systems, v. 6 n. 5_6, Techno-Press, p. 461-480

    https://doi.org/10.12989/sss.2010.6.5_6.461

  6. Clarke T. (2009), "Development of a low-frequency high purity A0mode transducer for SHM applications" in IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control, v. 56 n. 7, Institute of Electrical and Electronics Engineers (IEEE), p. 1457-1468

    https://doi.org/10.1109/TUFFC.2009.1201

  7. Giurgiutiu Victor (1999), "Experimental Investigation of E/M Impedance Health Monitoring for Spot-Welded Structural Joints" in Journal of Intelligent Material Systems and Structures, v. 10 n. 10, SAGE Publications, p. 802-812

    https://doi.org/10.1106/N0J5-6UJ2-WlGV-Q8MC

  8. ISHMP (2011). http://shm.cs.uiuc.edu/ (website).
  9. Jang Shinae (2010), "Structural health monitoring of a cable-stayed bridge using smart sensor technology: deployment and evaluation" in Smart Structures and Systems, v. 6 n. 5_6, Techno-Press, p. 439-459

    https://doi.org/10.12989/sss.2010.6.5_6.439

  10. Koo Ki-Young (2009), "Automated Impedance-based Structural Health Monitoring Incorporating Effective Frequency Shift for Compensating Temperature Effects" in Journal of Intelligent Material Systems and Structures, v. 20 n. 4, SAGE Publications, p. 367-377

    https://doi.org/10.1177/1045389X08088664

  11. Korea Society of Civil Engineers (2006). Korean design guidelines of steel cable-supported bridges. Seoul, Korea: Haklimsa[in Korean].
  12. Lee, Sang Jun / Sohn, Hoon (2006): Active self-sensing scheme development for structural health monitoring. Dans: Smart Materials and Structures, v. 15, n. 6 (décembre 2006), pp. .

    https://doi.org/10.1088/0964-1726/15/6/028

  13. Liang C. (1994), "Coupled Electro-Mechanical Analysis of Adaptive Material Systems — Determination of the Actuator Power Consumption and System Energy Transfer" in Journal of Intelligent Material Systems and Structures, v. 5 n. 1, SAGE Publications, p. 12-20

    https://doi.org/10.1177/1045389X9400500102

  14. Lopes Vicente (2000), "Impedance-Based Structural Health Monitoring with Artificial Neural Networks" in Journal of Intelligent Material Systems and Structures, v. 11 n. 3, SAGE Publications, p. 206-214

    https://doi.org/10.1106/H0EV-7PWM-QYHW-E7VF

  15. Mascareñas, David L. / Todd, Michael D. / Park, Gyuhae / Farrar, Charles R. (2007): Development of an impedance-based wireless sensor node for structural health monitoring. Dans: Smart Materials and Structures, v. 16, n. 6 (décembre 2007), pp. .

    https://doi.org/10.1088/0964-1726/16/6/016

  16. MEMSIC (2011). http://www.memsic.com/ (website).
  17. Min, Jiyoung / Park, Seunghee / Yun, Chung-Bang (2010): Impedance-based structural health monitoring using neural networks for autonomous frequency range selection. Dans: Smart Materials and Structures, v. 19, n. 12 (décembre 2010), pp. .

    https://doi.org/10.1088/0964-1726/19/12/125011

  18. Min Jiyoung (2010), "Development of a low-cost multifunctional wireless impedance sensor node" in Smart Structures and Systems, v. 6 n. 5_6, Techno-Press, p. 689-709

    https://doi.org/10.12989/sss.2010.6.5_6.689

  19. Min, Jiyoung / Park, Seunghee / Yun, Chung-Bang / Lee, Chang-Geun / Lee, Changgil (2012): Impedance-based structural health monitoring incorporating neural network technique for identification of damage type and severity. Dans: Engineering Structures, v. 39 (juin 2012), pp. .

    https://doi.org/10.1016/j.engstruct.2012.01.012

  20. Moulin Emmanuel (1997), "Piezoelectric transducer embedded in a composite plate: Application to Lamb wave generation" in Journal of Applied Physics, v. 82 n. 5, AIP Publishing, p. 2049-2055

    https://doi.org/10.1063/1.366015

  21. Nagayama T. (2007), "Issues in structural health monitoring employing smart sensors" in Smart Structures and Systems, v. 3 n. 3, Techno-Press, p. 299-320

    https://doi.org/10.12989/sss.2007.3.3.299

  22. Okafor, A. Chukwujekwu / Chandrashekhara, K. / Jiang, Y. P. (1996): Delamination prediction in composite beams with built-in piezoelectric devices using modal analysis and neural network. Dans: Smart Materials and Structures, v. 5, n. 3 (juin 1996), pp. .

    https://doi.org/10.1088/0964-1726/5/3/012

  23. Overly, Timothy G. S. / Park, Gyuhae / Farinholt, Kevin M. / Farrar, Charles R. (2008): Development of an extremely compact impedance-based wireless sensing device. Dans: Smart Materials and Structures, v. 17, n. 6 (décembre 2008), pp. .

    https://doi.org/10.1088/0964-1726/17/6/065011

  24. PARK Gyuhae (1999), "Impedance-Based Structural Health Monitoring for Temperature Varying Applications." in JSME International Journal Series A, v. 42 n. 2, Japan Society of Mechanical Engineers, p. 249-258

    https://doi.org/10.1299/jsmea.42.249

  25. Park Gyuhae (2003), "Overview of Piezoelectric Impedance-Based Health Monitoring and Path Forward" in The Shock and Vibration Digest, v. 35 n. 6, SAGE Publications, p. 451-463

    https://doi.org/10.1177/05831024030356001

  26. Park Hyun-Jun (2010), "A wireless guided wave excitation technique based on laser and optoelectronics" in Smart Structures and Systems, v. 6 n. 5_6, Techno-Press, p. 749-765

    https://doi.org/10.12989/sss.2010.6.5_6.749

  27. Park, Hyun-Jun / Sohn, Hoon / Yun, Chung-Bang / Chung, Joseph / Lee, Michael M. S. (2012): Wireless guided wave and impedance measurement using laser and piezoelectric transducers. Dans: Smart Materials and Structures, v. 21, n. 3 (mars 2012), pp. .

    https://doi.org/10.1088/0964-1726/21/3/035029

  28. "Proceedings of SPIE Annual Symposium on Smart Structures and Materials and Nondestructive Evaluation and Health Monitoring"
  29. Raghavan A. (2007), "Review of Guided-wave Structural Health Monitoring" in The Shock and Vibration Digest, v. 39 n. 2, SAGE Publications, p. 91-114

    https://doi.org/10.1177/0583102406075428

  30. Rice Jennifer A. (2010), "Flexible smart sensor framework for autonomous structural health monitoring" in Smart Structures and Systems, v. 6 n. 5_6, Techno-Press, p. 423-438

    https://doi.org/10.12989/sss.2010.6.5_6.423

  31. Spencer, B.F.Jr, & Cho, S. (2011). Wireless smart sensor technology for monitoring civil infrastructure: Technological developments and full-scale applications. Seoul, Korea: The 2011 World Congress on Advances in Structural Engineering and Mechanics (ASEM′11+).
  32. "Proceedings of SPIE Annual Symposium on Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems"
  33. Yun, Chung-Bang / Lee, Jong-Jae / Koo, Ki-Young (2011): Smart structure technologies for civil infrastructures in Korea: recent research and applications. Dans: Structure and Infrastructure Engineering, v. 7, n. 9 (septembre 2011), pp. .

    https://doi.org/10.1080/15732470902720109

Publicité

  • Informations
    sur cette fiche
  • Reference-ID
    10143672
  • Création
    25.11.2018
  • Modification
    25.11.2018