0
  • DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

Simulation Analysis of the Structure of an Integrated Modular House by Flat Pack Based on the Elastic–Plastic Contact Theory and Experimental Study of Its Corner Fitting Joint

Auteur(s):






ORCID
Médium: article de revue
Langue(s): anglais
Publié dans: Buildings, , n. 3, v. 14
Page(s): 635
DOI: 10.3390/buildings14030635
Abstrait:

Based on the elastic–plastic contact theory, elastic–plastic contact finite element models for the integrated modular house by flat pack are established. The structural stress and displacement distributions are obtained. An experimental test is conducted to study the performance of the corner fitting joint of the house. The finite element analysis and experimental test comprehensively demonstrated the safety and reliability of the house structure. The results show that the most unfavorable stress point of the house is located at the corner fitting joint. When the end plate connection holes of the corner column seal are designed with through holes and internal screw holes, respectively, the fastening effect of bolting between the corner fitting and corner column using the internal screw hole is better. The reliability of the repeated disassembly and assembly of the house is verified via multiple loading–unloading simulation cycle experiments of the corner fitting joint. The results of the study provide technical support and a reference basis for the optimal design and ensuring the service performance of the integrated modular house by flat pack.

Copyright: © 2024 by the authors; licensee MDPI, Basel, Switzerland.
License:

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.

  • Informations
    sur cette fiche
  • Reference-ID
    10773982
  • Publié(e) le:
    29.04.2024
  • Modifié(e) le:
    05.06.2024
 
Structurae coopère avec
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine