Shear Lag Effect In The Numerical Experiment
|Médium:||article de revue|
|Publié dans:||Archives of Civil Engineering, septembre 2015, n. 3, v. 61|
The standard PN-EN 1993-1-5: 2008 (Eurocode 3) compared with the standard (PN-B-03200: 1990) used previously in Poland, introduces extended rules referring to the computations of the bearing capacity of the plated structural elements including the shear lag effect. The stress distribution in the width flanges is variable. Therefore in the case of the beam with the shear lag effect cannot be calculated by the classic beam theory.
In this article a comparison of the results of the calculations of forces distribution, stresses and displacement according to the rule presented in PN-EN 1993 and results of the numerical computations for 3D model (using finite element method) is presented. The elastic shear lag effects, the elastic shear lag effects including effects of the plate buckling and the elastic-plastic shear lag effects including the local instabilities were analysed. The calculations were performed for beams with a small and a large span and an influence of stiffeners was analysed.
sur cette fiche
- Publié(e) le:
- Modifié(e) le: