Settlement Calculation of Semi-Rigid Pile Composite Foundation on Ultra-Soft Soil under Embankment Load

Ultra-soft soil is distributed in coastal areas around the world and has poor engineering properties. There is a significant difference in settlement between semi-rigid pile and surrounding soil under embankment load. Based on existing research results, the settlement calculation formula of ultra-soft soil composite foundation reinforced by semi-rigid pile is derived in this paper. Based on the Alamgir displacement model, assuming a three-zone model of pile skin friction with a negative skin friction plastic zone in the upper part of the pile, an elastic zone in the middle part of the pile, and a skin friction-bearing plastic zone in the lower part of the pile, the upward and downward penetrations of pile, and pile–soil slip deformation characteristics are considered. Analytical expressions for settlement calculations of semi-rigid pile composite foundations under embankments were derived based on differential equations for pile–soil load transfer in the unit cell. The influences of pile diameter and the compression modulus of the underlying layer at the pile end on the settlement characteristics of the semi-rigid pile composite foundation are discussed. The results show that the derived theoretical calculation method is in good agreement with the field measurement and laboratory model test results. Ultra-soft soil composite foundations have long settlement stabilization times and large settlement deformations. Penetration deformation occurs at the semi-rigid pile end. The relationship between pile end resistance and pile end piercing deformation is hyperbolic. The compression modulus of the underlying layer has a great influence on pile end penetration. The lower the compression modulus of the underlying layer, the larger the penetration deformation of pile end. The larger the pile diameter is, the smaller the penetration deformation is.

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.