Seismic Performance Analysis of RC Frame Structure Beam–Column Joints Based on Strong Column and Weak Beam Method

Based on the design concept of a strong column and weak beam, a new type of reinforced concrete frame structure beam–column joint is proposed. Considering different column end amplification factors (beam–column bending moment ratio), the finite element method (FEA) is used to analyze the parameters that affect the seismic performance of RC frame structure beam–column joints. The reliability verification error is within 4.8% to 11.7%, meeting the requirements of engineering accuracy. Then, through parameter analysis, the effects of different concrete strengths, stirrup diameters, and axial pressures on the seismic performance of the joint are studied. The study results show that enhancing concrete strength has a significant effect on the seismic performance of the structure, especially when the amplification factor is 2.0. Compared with the C20 specimen, the bearing capacity of the C40 specimen increased by 26.88%. However, the increase in stirrup diameter did not significantly improve the performance of the specimen. In addition, a high axial pressure ratio may affect the bearing capacity of the structure. This study provides a new type of beam–column joint that conforms to the design concept of a strong column and weak beam and provides a theoretical basis for its application in engineering.

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.