Seismic Isolation of Fragile Pole-Type Structures by Rocking with Base Restraints

Pole-type structures are vulnerable to earthquake events due to their slender shapes, particularly porcelain cylindrical equipment in electrical substations, which has inherent fragility and low strength in its materials. Traditional base isolation designs configure the bottom of the pole-type equipment as hinges with restraints. It fully relies on the restrainers to re-center the pole-type equipment, posing a risk of tilting and functionality failure after earthquakes. This study proposes a solution to this challenge by introducing a restrained rocking mechanism at the base of the structure. The design leverages the self-centering nature of rocking motion and uses restrainers to control the amplitude of rotation. Hence, it can effectively avoid tilting of the pole-type structures after earthquakes. Experimental investigations conducted on a 1:1 full-scale specimen revealed that the proposed restrained rocking design can achieve a reduction in seismic internal forces of over 50% while maintaining equipment in an upright position. Furthermore, an analytical model for the proposed isolation system of pole structures was developed and validated through comparison with experimental results. This paper introduces a novel solution for seismic isolation of pole-type structures through restrained rocking, specifically addressing the research gap regarding a reliable self-centering mechanism under seismic excitation. This advancement significantly enhances the seismic resilience of fragile pole-type structures and provides practical design methodologies for the seismic isolation of slender structures.

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.