Seismic Behaviour of Cast-In-Situ Phosphogypsum-Reinforced Concrete Grid Frame Composite Walls

This paper mainly studies the effect of cast-in-situ phosphogypsum on seismic behaviour of reinforced concrete grid frame. The mechanical behaviour of three reinforced concrete grid frames and four cast-in-situ phosphogypsum-reinforced concrete grid frame composite walls under low cycle alternating load was designed and tested. The test results show that the reinforced concrete grid frame has less bearing capacity and poor energy consumption. The addition of cast-in-situ phosphogypsum can effectively improve the seismic behaviour of the reinforced concrete grid frame. Compared with the reinforced concrete grid frame, the bearing capacity of the cast-in-situ phosphogypsum-reinforced concrete grid frame composite wall is increased by 2-3 times, the displacement ductility coefficient is increased by 0.95∼1.2 times, and the relative accumulative energy consumption is increased by 86%∼216%. This shows that the composite wall has better bearing capacity, ductility, and energy dissipation capacity.

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.