• DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

Seismic Bearing Capacity of Strip Footings on Cohesive Soil Slopes by Using Adaptive Finite Element Limit Analysis

  1. in Danish Geotechnical Institute, Bulletin, v. 11 (1961), p. 38
  2. "Bearing capacity of shallow foundations"
  3. Azzouz Amr S. (1983), "Loaded Areas on Cohesive Slopes" in Journal of Geotechnical Engineering, v. 109, n. 5, American Society of Civil Engineers (ASCE), p. 724-729

    https://doi.org/10.1061/(asce)0733-9410(1983)109:5(724)

  4. Castelli Francesco (2010), "Bearing Capacity of Strip Footings Near Slopes" in Geotechnical and Geological Engineering, v. 28, n. 2, Springer Science and Business Media LLC, p. 187-198

    https://doi.org/10.1007/s10706-009-9277-9

  5. NARITA KUNITOMO (1990), "Bearing capacity analysis of foudations on slopes by use of log-spiral sliding surfaces." in SOILS AND FOUNDATIONS, v. 30, n. 3, Elsevier BV, p. 144-152

    https://doi.org/10.3208/sandf1972.30.3_144

  6. Graham J. (1989), "Stress characteristics for shallow footings in cohesionless slopes: Reply" in Canadian Geotechnical Journal, v. 26, n. 4, Canadian Science Publishing, p. 755-756

    https://doi.org/10.1139/t89-089

  7. GEORGIADIS K. (2010), "An upper-bound solution for the undrained bearing capacity of strip footings at the top of a slope" in Géotechnique, v. 60, n. 10, Thomas Telford Ltd., p. 801-806

    https://doi.org/10.1680/geot.09.t.016

  8. KUSAKABE OSAMU (1981), "Bearing capacity of slopes under strip loads on the top surfaces." in SOILS AND FOUNDATIONS, v. 21, n. 4, Elsevier BV, p. 29-40

    https://doi.org/10.3208/sandf1972.21.4_29

  9. Georgiadis K. (2010), "Undrained Bearing Capacity of Strip Footings on Slopes" in Journal of Geotechnical and Geoenvironmental Engineering, v. 136, n. 5, American Society of Civil Engineers (ASCE), p. 677-685

    https://doi.org/10.1061/(asce)gt.1943-5606.0000269

  10. Georgiadis Konstantinos (2010), "The influence of load inclination on the undrained bearing capacity of strip footings on slopes" in Computers and Geotechnics, v. 37, n. 3, Elsevier BV, p. 311-322

    https://doi.org/10.1016/j.compgeo.2009.11.004

  11. Shiau J. S. (2011), "Undrained Stability of Footings on Slopes" in International Journal of Geomechanics, v. 11, n. 5, American Society of Civil Engineers (ASCE), p. 381-390

    https://doi.org/10.1061/(asce)gm.1943-5622.0000092

  12. Leshchinsky Ben (2015), "Bearing Capacity of Footings Placed Adjacent to c′-ϕ′ Slopes" in Journal of Geotechnical and Geoenvironmental Engineering, v. 141, n. 6, American Society of Civil Engineers (ASCE), p. 04015022

    https://doi.org/10.1061/(asce)gt.1943-5606.0001306

  13. Leshchinsky Ben (2017), "Bearing Capacity for Spread Footings Placed Near c′-ϕ′ Slopes" in Journal of Geotechnical and Geoenvironmental Engineering, v. 143, n. 1, American Society of Civil Engineers (ASCE), p. 06016020

    https://doi.org/10.1061/(asce)gt.1943-5606.0001578

  14. Zhou Haizuo (2019), "Ultimate seismic bearing capacities and failure mechanisms for strip footings placed adjacent to slopes" in Canadian Geotechnical Journal, v. 56, n. 11, Canadian Science Publishing, p. 1729-1735

    https://doi.org/10.1139/cgj-2018-0306

  15. Budhu M. (1993), "Seismic bearing capacity of soils" in Géotechnique, v. 43, n. 1, Thomas Telford Ltd., p. 181-187

    https://doi.org/10.1680/geot.1993.43.1.181

  16. Choudhury Deepankar (2006), "Seismic Bearing Capacity of Shallow Strip Footings Embedded in Slope" in International Journal of Geomechanics, v. 6, n. 3, American Society of Civil Engineers (ASCE), p. 176-184

    https://doi.org/10.1061/(asce)1532-3641(2006)6:3(176)

  17. Kumar J. (2003), "Seismic bearing capacity of rough footings on slopes using limit equilibrium" in Géotechnique, v. 53, n. 3, Thomas Telford Ltd., p. 363-369

    https://doi.org/10.1680/geot.2003.53.3.363

  18. Sarma S. K. (1990), "Seismic bearing capacity factors of shallow strip footings" in Géotechnique, v. 40, n. 2, Thomas Telford Ltd., p. 265-273

    https://doi.org/10.1680/geot.1990.40.2.265

  19. Askari F. (2003), "Upper-bound solution for seismic bearing capacity of shallow foundations near slopes" in Géotechnique, v. 53, n. 8, Thomas Telford Ltd., p. 697-702

    https://doi.org/10.1680/geot.2003.53.8.697

  20. Dormieux L. (1995), "Seismic Bearing Capacity of Foundation on Cohesionless Soil" in Journal of Geotechnical Engineering, v. 121, n. 3, American Society of Civil Engineers (ASCE), p. 300-303

    https://doi.org/10.1061/(asce)0733-9410(1995)121:3(300)

  21. Kumar J. (2006), "Seismic bearing capacity for embedded footings on sloping ground" in Géotechnique, v. 56, n. 2, Thomas Telford Ltd., p. 133-140

    https://doi.org/10.1680/geot.2006.56.2.133

  22. Yamamoto Kentaro (2010), "Seismic bearing capacity of shallow foundations near slopes using the upper-bound method" in International Journal of Geotechnical Engineering, v. 4, n. 2, Informa UK Limited, p. 255-267

    https://doi.org/10.3328/ijge.2010.04.02.255-267

  23. Kumar J. (2003), "Seismic bearing capacity of foundations on slopes" in Géotechnique, v. 53, n. 3, Thomas Telford Ltd., p. 347-361

    https://doi.org/10.1680/geot.2003.53.3.347

  24. Jiang, Chong / He, Jia-li / Liu, Lin / Sun, Bo-Wen (2018): Effect of Loading Direction and Slope on Laterally Loaded Pile in Sloping Ground. Dans: Advances in Civil Engineering, v. 2018 ( 2018).

    https://doi.org/10.1155/2018/7569578

  25. Raj Dhiraj (2018), "Seismic Bearing Capacity of Strip Foundation Embedded in c - ϕ Soil Slope" in International Journal of Geomechanics, v. 18, n. 7, American Society of Civil Engineers (ASCE), p. 04018076

    https://doi.org/10.1061/(asce)gm.1943-5622.0001194

  26. Kumar Jyant (2013), "Seismic Bearing Capacity of Foundations on Cohesionless Slopes" in Journal of Geotechnical and Geoenvironmental Engineering, v. 139, n. 11, American Society of Civil Engineers (ASCE), p. 1986-1993

    https://doi.org/10.1061/(asce)gt.1943-5606.0000909

  27. Chakraborty Debarghya (2015), "Seismic Bearing Capacity of Shallow Embedded Foundations on a Sloping Ground Surface" in International Journal of Geomechanics, v. 15, n. 1, American Society of Civil Engineers (ASCE), p. 04014035

    https://doi.org/10.1061/(asce)gm.1943-5622.0000403

  28. Chakraborty Debarghya (2016), "Seismic Bearing Capacity Factors for Strip Footings on an Embankment by Using Lower-Bound Limit Analysis" in International Journal of Geomechanics, v. 16, n. 3, American Society of Civil Engineers (ASCE), p. 06015008

    https://doi.org/10.1061/(asce)gm.1943-5622.0000553

  29. Zhou Haizuo (2018), "The bearing capacity and failure mechanism of a vertically loaded strip footing placed on the top of slopes" in Computers and Geotechnics, v. 94, Elsevier BV, p. 12-21

    https://doi.org/10.1016/j.compgeo.2017.08.009

  30. Cinicioglu, Ozer / Erkli, Anil (2018): Seismic bearing capacity of surficial foundations on sloping cohesive ground. Dans: Soil Dynamics and Earthquake Engineering, v. 111 (août 2018).

    https://doi.org/10.1016/j.soildyn.2018.04.027

  31. Richards R. (1994), "Seismic Lateral Pressures in Soils with Cohesion" in Journal of Geotechnical Engineering, v. 120, n. 7, American Society of Civil Engineers (ASCE), p. 1230-1251

    https://doi.org/10.1061/(asce)0733-9410(1994)120:7(1230)

  32. SLOAN S.W. (2013), "Geotechnical stability analysis" in Géotechnique, v. 63, n. 7, Thomas Telford Ltd., p. 531-571

    https://doi.org/10.1680/geot.12.rl.001

  33. Shiau J S (2003), "Bearing capacity of a sand layer on clay by finite element limit analysis" in Canadian Geotechnical Journal, v. 40, n. 5, Canadian Science Publishing, p. 900-915

    https://doi.org/10.1139/t03-042

  34. Xiao Yao (2018), "Undrained stability of strip footing above voids in two-layered clays by finite element limit analysis" in Computers and Geotechnics, v. 97, Elsevier BV, p. 124-133

    https://doi.org/10.1016/j.compgeo.2018.01.005

  35. Xiao Yao (2018), "Finite Element Limit Analysis of the Bearing Capacity of Strip Footing on a Rock Mass with Voids" in International Journal of Geomechanics, v. 18, n. 9, American Society of Civil Engineers (ASCE), p. 04018108

    https://doi.org/10.1061/(asce)gm.1943-5622.0001262

  36. Sahoo Jagdish Prasad (2018), "Required Lining Pressure for the Stability of Twin Circular Tunnels in Soils" in International Journal of Geomechanics, v. 18, n. 7, American Society of Civil Engineers (ASCE), p. 04018069

    https://doi.org/10.1061/(asce)gm.1943-5622.0001196

  37. Wilson Daniel W. (2014), "Undrained Stability of Dual Circular Tunnels" in International Journal of Geomechanics, v. 14, n. 1, American Society of Civil Engineers (ASCE), p. 69-79

    https://doi.org/10.1061/(asce)gm.1943-5622.0000288

  38. Xiao Yao (2019), "Stability of two circular tunnels at different depths in cohesive-frictional soils subjected to surcharge loading" in Computers and Geotechnics, v. 112, Elsevier BV, p. 23-34

    https://doi.org/10.1016/j.compgeo.2019.04.006

  39. Xiao, Yao / Zhao, Minghua / Zhang, Rui / Zhao, Heng / Wu, Gaoqiao (2019): Stability of dual square tunnels in rock masses subjected to surcharge loading. Dans: Tunnelling and Underground Space Technology, v. 92 (octobre 2019).

    https://doi.org/10.1016/j.tust.2019.103037

  40. Zhang Rui (2019), "Stability of dual circular tunnels in a rock mass subjected to surcharge loading" in Computers and Geotechnics, v. 108, Elsevier BV, p. 257-268

    https://doi.org/10.1016/j.compgeo.2019.01.004

  41. Lim K. (2017), "Mean Parametric Monte Carlo Study of Fill Slopes" in International Journal of Geomechanics, v. 17, n. 4, American Society of Civil Engineers (ASCE), p. 04016105

    https://doi.org/10.1061/(asce)gm.1943-5622.0000812

  42. Qian Z. G. (2015), "Slope Stability Charts for Two-Layered Purely Cohesive Soils Based on Finite-Element Limit Analysis Methods" in International Journal of Geomechanics, v. 15, n. 3, American Society of Civil Engineers (ASCE), p. 06014022

    https://doi.org/10.1061/(asce)gm.1943-5622.0000438

  43. Xiao Yao (2019), "Undrained Bearing Capacity of Strip Footings Placed Adjacent to Two-Layered Slopes" in International Journal of Geomechanics, v. 19, n. 8, American Society of Civil Engineers (ASCE), p. 06019014

    https://doi.org/10.1061/(asce)gm.1943-5622.0001480

  44. Kumar Jyant (2008), "Effect of Footing Roughness on Lower Bound Nγ Values" in International Journal of Geomechanics, v. 8, n. 3, American Society of Civil Engineers (ASCE), p. 176-187

    https://doi.org/10.1061/(asce)1532-3641(2008)8:3(176)

  45. Kumar Jyant (2012), "Upper Bound Solution for Pullout Capacity of Vertical Anchors in Sand Using Finite Elements and Limit Analysis" in International Journal of Geomechanics, v. 12, n. 3, American Society of Civil Engineers (ASCE), p. 333-337

    https://doi.org/10.1061/(asce)gm.1943-5622.0000160

  46. Krabbenhoft Kristian (2005), "A new discontinuous upper bound limit analysis formulation" in International Journal for Numerical Methods in Engineering, v. 63, n. 7, Wiley, p. 1069-1088

    https://doi.org/10.1002/nme.1314

  47. Ciria H. (2008), "Mesh adaptive computation of upper and lower bounds in limit analysis" in International Journal for Numerical Methods in Engineering, v. 75, n. 8, Wiley, p. 899-944

    https://doi.org/10.1002/nme.2275

  48. Muñoz J. J. (2009), "Upper and lower bounds in limit analysis: Adaptive meshing strategies and discontinuous loading" in International Journal for Numerical Methods in Engineering, v. 77, n. 4, Wiley, p. 471-501

    https://doi.org/10.1002/nme.2421

  49. Herskovits J. (2005), "Mathematical programming models and algorithms for engineering design optimization" in Computer Methods in Applied Mechanics and Engineering, v. 194, n. 30-33, Elsevier BV, p. 3244-3268

    https://doi.org/10.1016/j.cma.2004.12.017

  50. Zhang Rui (2019), "Study on roof collapse of deep circular cavities in jointed rock masses using adaptive finite element limit analysis" in Computers and Geotechnics, v. 111, Elsevier BV, p. 42-55

    https://doi.org/10.1016/j.compgeo.2019.03.003

  51. Zhang Rui (2018), "An adaptive remeshing procedure for discontinuous finite element limit analysis" in International Journal for Numerical Methods in Engineering, Wiley

    https://doi.org/10.1002/nme.5925

Publicité

  • Informations
    sur cette fiche
  • Reference-ID
    10374482
  • Publié(e) le:
    19.09.2019
  • Modifié(e) le:
    06.10.2019