0
  • DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

Auteur(s):




Médium: article de revue
Langue(s): anglais
Publié dans: Buildings, , n. 3, v. 10
Page(s): 41
DOI: 10.3390/buildings10030041
Abstrait:

This study describes the relationship between the physio-mechanical and chemical properties of sand-lime materials which have undergone hydrothermal treatment, and which were modified through the introduction of glass components (90% glass sand, GS). Process parameters such as temperature, pressure and saturation vapor pressure were found to have a significant impact on the series of chemical reactions as well as on the formation and transformation of solid hydrates. During the stirring process of sand-lime mass, the temperature of the reaction between lime and water in the presence of quartz sand (QS) was determined to be 83 °C. In the presence of glass sand, measured temperature was only 42 °C. Thermodynamic equilibrium-based modelling was applied to predict stable phase assemblages in the studied systems. It was found that compositional modification along with the application of the autoclaving process resulted in the formation of two crystalline phases: natrolite and gyrolite. Compressive strength and density were also assessed. The strength of fresh laboratory samples was found to be greater than their traditional analogues by 15 MPa. In addition to experimental characterization, sand-lime materials were also modeled using neural networks (backpropagation neural network, BPNN) which serve as a universal approximation method capable of modelling complex functions.

Copyright: © 2020 by the authors; licensee MDPI, Basel, Switzerland.
License:

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.

  • Informations
    sur cette fiche
  • Reference-ID
    10415078
  • Publié(e) le:
    02.03.2020
  • Modifié(e) le:
    02.06.2021
 
Structurae coopère avec
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine