A Review on the Performance of Fibers on Restrained Plastic Shrinkage Cracks

Multiple studies have investigated the use of steel, synthetic fibers, and natural fibers to reduce plastic shrinkage cracks in concrete, which are mostly caused by water evaporation from the surface of the material. This review used original published research articles from the Web of Science and Scopus database to evaluate the performance and relationship between the fiber volume, aspect ratio, compressive strength, and plastic shrinkage cracking. This review also discussed the most widely used technique for evaluating plastic shrinkage cracking, the ASTM C 1579, with two bottom restraints and a central stress riser to induce cracking, and its modified version with additional reinforcement for further restraining the ASTM C 1579 mold. Longer fibers function better than shorter fibers because of their larger surface area, which allows them to bridge fissures. It was also observed that crack initiation time is delayed when fibers are added to concrete. In addition, as the volume proportion of the fibers increased, the plastic shrinkage cracks decreased, but the compressive strength declined. Furthermore, the volume fraction of the fibers had a greater effect on reducing cracking than the aspect ratio. It was also concluded that a fiber volume inclusion below 1% is best.

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.