• DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

Research on Physical Similarity Simulation of Mining Uphill and Downhill at the Large-Angle Working Face

Auteur(s):




Médium: article de revue
Langue(s): en 
Publié dans: Advances in Civil Engineering, , v. 2019
Page(s): 1-19
DOI: 10.1155/2019/7696752
Abstrait:

With the development of coal mining and the continuous expansion of mining intensity, large dip angle comprehensive mechanized coal mining as an important development direction and goal has become a worldwide research topic in the coal industry. The working face faces many production problems that need to be solved, such as the large-angle downhill mining, the large-angle uphill mining, and other complicated geological conditions (such as skew, anticline, and fault). In view of the above problems, with the specific conditions of Xinji No. 2 Mine, through the physical similarity simulation, the research on the roof movement law of the fully mechanized mining face under the mining conditions of large dip angle (depression angle and elevation angle are more than 40° and 20°, respectively) is studied. The distribution law of abutment pressure, movement law, and distribution range of water-conducting fracture zone after mining are emphasized. Meanwhile, the paper analyzes and compares the related mining pressure law of inclined longwall fully mechanized mining face under general conditions, forming a systematic, comprehensive, and scientific understanding of the law of mining pressure under such conditions. This achievement is of great significance to the prevention and control of water, support design, safety production, environmental improvement, improvement of enterprise efficiency, and advancement of coal science and technology.

Copyright: © 2019 Meng Zhang et al.
License:

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.

  • Informations
    sur cette fiche
  • Reference-ID
    10299094
  • Publié(e) le:
    06.02.2019
  • Modifié(e) le:
    02.06.2021