Research on Fatigue Performance of the Rib Beam Bridge Carriageway Slab Based on Cumulative Damage Theory

The purpose of this paper is to study the development law of fatigue damage of the carriageway slab of reinforced concrete ribbed girder bridge and to provide theoretical support for carriageway slab design. The fatigue test of reinforced concrete rib beam bridge carriageway slabs was conducted. Based on the material fatigue damage theory, the fatigue damage model was established by ABAQUS software. The fatigue performance, failure mechanism, and the effect of fatigue level on the fatigue performance of the carriageway slab were studied. The experimental research results show that when the slab of the rib beam bridge was fatigued, and the radial crack appeared at the bottom of the slab, which belonged to punching shear failure. The fatigue failure process was divided into three stages as follows: in the initial stage of fatigue, the deflection and reinforcement strain increased linearly with fatigue times, and in the stable development stage, the bottom deflection and reinforcement strain increased steady progression. With the increase in fatigue cycles, the fatigue accumulation damage was gradually accumulated, and the stiffness of the carriageway slab gradually decreases. In the rapid development stage, the deflection, reinforcement strain, and crack growth speed were significantly increased. According to the fatigue damage model, the simulation analysis results show that the accumulated damage to the bridge carriageway was more serious with the increase in fatigue load level. The fatigue damage degree was lower when the design fatigue load level is not greater than 0.55.

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.