• DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

Reliability-based calibration of Brazilian structural design codes used in the design of concrete structures

Auteur(s):


Médium: article de revue
Langue(s): en 
Publié dans: Revista IBRACON de Estruturas e Materiais, , n. 6, v. 12
Page(s): 1288-1304
DOI: 10.1590/s1983-41952019000600004
Abstrait:

This paper presents a reliability-based calibration of partial safety factors for Brazilian codes used in the design of concrete structures. The work is based on reliability theory, which allows an explicit representation of the uncertainties involved in terms of resistances and loads. Regarding the resistances, this study considers beams with concrete of five classes (C20, C30, C40, C50 and C60), three ratios between base and effective depth (0.25, 0.50 and 0.75), three longitudinal reinforcement ratios (ρmin, 0.5% and ρmax) and three transverse reinforcement ratios ( A s s m i n, 5 . A s s m i n and A s s m a x). In terms of loads, this work considers seven ratios between live loads and permanent loads (qn/gn), and seven ratios between wind loads and permanent loads (wn/gn). The study also adopts a single value for the target reliability index (βtarget = 3.0). Results show that the optimized set of partial safety factors leads to more uniform reliability for different design situations and load combinations.

License:

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.

Publicité

  • Informations
    sur cette fiche
  • Reference-ID
    10413171
  • Publié(e) le:
    12.02.2020
  • Modifié(e) le:
    12.02.2020