A Refined Model for Predicting Concrete-Related Failure Load of Tension Loaded Cast-in-Place Headed Anchors in Uncracked Concrete
Auteur(s): |
Rasoul Nilforoush
(Ph.D., Associate senior lecturer, Div. of Structural and Fire Engineering , Luleå University of Technology , LTU, SE-971 87 Luleå , Sweden .)
|
---|---|
Médium: | article de revue |
Langue(s): | anglais |
Publié dans: | Nordic Concrete Research, juin 2019, n. 1, v. 60 |
Page(s): | 105-129 |
DOI: | 10.2478/ncr-2019-0091 |
Abstrait: |
Current theoretical models for predicting the concrete cone breakout capacity of tension loaded headed anchors do not consider the influence of member thickness, size of anchor head, and orthogonal surface reinforcement. In the present study, the influence of the aforementioned parameters was studied both numerically and experimentally. Both the numerical and experimental results showed that the tensile resistance of headed anchors increases by increasing the member thickness or if orthogonal surface reinforcement is present. In addition, the anchorage capacity further increases with increase of the anchor head size. The current model for predicting the concrete cone failure load of tension loaded headed anchors were refined and extended by incorporating three modification factors to account for the influence of the member thickness, size of anchor head, and orthogonal surface reinforcement. The accuracy of the proposed model was verified based on the results of 124 tests on single headed anchors from literature. |
- Informations
sur cette fiche - Reference-ID
10705857 - Publié(e) le:
19.02.2023 - Modifié(e) le:
19.02.2023