^ Recycled Concrete Aggregates and Their Influences on Performances of Low and Normal Strength Concretes | Structurae
0
  • DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

Recycled Concrete Aggregates and Their Influences on Performances of Low and Normal Strength Concretes

Auteur(s):


Médium: article de revue
Langue(s): anglais
Publié dans: Buildings, , n. 9, v. 10
Page(s): 167
DOI: 10.3390/buildings10090167
Abstrait:

Recycled materials are now widely used in various industrial sectors to enhance sustainability and reduce environmental charges. Using recycled aggregates in concrete production significantly lowers demand for natural aggregates and the amount of solid waste sent to landfills. This paper summarizes the main results of a study undertaken to design low and normal strength concrete with various replacement ratios of coarse recycled concrete aggregates (RCA). To persuade the concrete industry to use recycled materials as one of the main components of concrete produced, the overall mechanical and durability performances of the RCA-concrete should be close or even similar to the concrete made with natural ingredients. The present research adopted an approach that consists of designing a series of low and normal strength with RCA having an equal target 28-day design strength to the corresponding natural aggregates concrete but while varying the water–cement ratios (w/c). Coarse recycled concrete aggregates, obtained by crushing waste concrete debris collected from different construction and demolition waste sources, were used in three different proportions of 30%, 50% and 100% (by weight) to produce new concrete with various w/c ratios and different compressive strength grades. Concrete mixes produced with general use Portland cement and various RCA contents were investigated in terms of their key mechanical and durability performances. The mechanical properties (crushing value) of the used RCA were visibly lower than the natural coarse aggregates (NCA). Thus, RCA-concrete showed lower performance than the NCA-concrete. It was found that by using up to 30% coarse RCA, the mechanical properties of concrete were not significantly affected. Beyond 30% of partial replacement of NCA by the coarse RCA, a continuing decrease in the mechanical performance with an increase in RCA amount was found. However, reducing the w/c ratio of concrete designed with the coarse RCA resulted in a compressive strength improvement, a better resistance to sulphate attack, carbonation, and chloride ion penetrations. Additionally, a proper design of Portland cement concrete produced with various proportions of RCA could also contribute to promoting sustainability in the construction industry and lowering its environmental impact.

Copyright: © 2020 by the authors; licensee MDPI, Basel, Switzerland.
License:

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.

  • Informations
    sur cette fiche
  • Reference-ID
    10444461
  • Publié(e) le:
    05.10.2020
  • Modifié(e) le:
    02.06.2021