0
  • DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

Preparation of Self-healing Additives for Concrete via Miniemulsion Polymerization: Formulation and Production Challenges

Auteur(s):

Médium: article de revue
Langue(s): anglais
Publié dans: International Journal of Concrete Structures and Materials, , n. 1, v. 15
DOI: 10.1186/s40069-020-00449-2
Abstrait:

Concrete structures undergo internal damage; this usually starts at the atomic level with defects that then grow and form cracks, which can propagate through the material. Here, a method of preparation of poly(methyl methacrylate) (PMMA) nanocapsules adhesive system via miniemulsion polymerization technique is reported, where MMA + DMA (resin + accelerator) and BPO (hardener) components are separately encapsulated by PMMA shells. The crack-healing potential of these nanocapsules was then investigated by embedding them into the mortar matrix. The prepared PMMA core–shell self-healing nanostructures survived the mixing and hardening processes, and the hardened mortar alkaline environment. The stress fields associated with propagating cracks (load‐induced cracking) broke the brittle/weak inert shell of these core–shell structures, resulted in releasing the healing agents to bridge the nascent and early-stage fractures (< 10 µm) in a short time. Long-term healing was achieved through the formation of polymorph calcite crystals in the presence of moisture and CO2, which improved the durability of mortar by filling the gaps. Formulation design (addition of chemical admixtures) and process parameters (blade design and mixing speed) were found to directly impact the uniform distribution of nanocapsules, the survival rate of nanocapsules, and the overall strength of the hardened concrete. The stepwise approach to formulate and fabricate a novel high-strength self-healing concrete system unlocks unique opportunities to design nanomaterials that safeguard the integrity of concrete structures.

Copyright: © The Author(s) 2021
License:

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.

  • Informations
    sur cette fiche
  • Reference-ID
    10556855
  • Publié(e) le:
    25.01.2021
  • Modifié(e) le:
    02.06.2021
 
Structurae coopère avec
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine