Preliminary Validation of Steel Slag-Aggregate Concrete for Rigid Pavements: A Full-Scale Study

The high wear resistance and toughness of electric arc furnace slag (EAFS) means that this industrial by-product can successfully replace natural aggregate in hydraulic or bituminous concretes that withstand vehicle traffic. This article validates the use of concrete made with large amounts of EAFS for rigid pavements. Accordingly, three EAFS–concrete mixes made with metallic or synthetic fibers were designed. Their performance was studied through laboratory tests (compressive strength, modulus of elasticity, splitting tensile strength, and abrasion resistance) and field observations on full-scale slabs made with each of the studied mixes. All mechanical properties yielded adequate results for concrete for rigid pavements. The metallic fibers increased the strength and elastic stiffness by 7–10%, while the addition of synthetic fibers slowed the development of these properties over time. On the other hand, all the mixes allowed for a successful implementation of full-scale slabs, with none of them showing excessive deterioration after five years of exposure to the outdoor environment. Only minor cracking and some chips in the surface-treatment layer were detected. The strength development of the slabs and their slipperiness were adequate for use in high-speed pavements. The overall analysis of the results shows that concrete made with EAFS can be used in real rigid pavements.

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.