0
  • DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

Predictive Modelling of Creep Crack Initiation and Growth using Extended Finite Element Method (XFEM)

Auteur(s):



Médium: article de revue
Langue(s): anglais
Publié dans: Frattura ed Integrità Strutturale, , n. 61, v. 16
Page(s): 119-129
DOI: 10.3221/igf-esis.61.08
Abstrait:

In this study, a numerical strategy for predictive modelling of creep in tension tests for the rectangular plate with a single crack and CT-specimen based on the extended finite element method (XFEM) will be described in detail. A model of creep fracture initiation and creep crack growth (CCG) is developed, while the XFEM is employed to spots located inside the finite element for the purpose of predicting crack potential and propagation. In order to characterize the creep fracture initiation, identification of C(t)-integral formula is conducted. In addition, XFEM and analytical solutions are also analyzed to look at the connection of C(t)-integral with time for a rectangular plate with a single crack under plane stress conditions. An illustration showing the se-quence of stress distribution and displacement contour plots are also being presented. The stresses and displacements spread throughout the crack path have also been determined using CT-specimens. In addition, the creep cracks growth length with normalized time and the creep crack growth rate with the C(t)-integral are predicted to be related, indicating that the numerical results are in good accord with the experimental results.

Structurae ne peut pas vous offrir cette publication en texte intégral pour l'instant. Le texte intégral est accessible chez l'éditeur. DOI: 10.3221/igf-esis.61.08.
  • Informations
    sur cette fiche
  • Reference-ID
    10690270
  • Publié(e) le:
    13.08.2022
  • Modifié(e) le:
    13.08.2022
 
Structurae coopère avec
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine