0
  • DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

The possibility of Manufacturing Building Bricks from Al-Qend Hills Clays in North Iraq by using the extrusion and pressing methods

Auteur(s):
Médium: article de revue
Langue(s): anglais
Publié dans: IOP Conference Series: Materials Science and Engineering, , n. 1, v. 870
Page(s): 012088
DOI: 10.1088/1757-899x/870/1/012088
Abstrait:

This study deals with the properties of Al-Qend Hills clays (Nineveh Governorate, North of Iraq) that effect on the production of building bricks and determines the best method for bricks industry. Two methods used to the manufacturing of clay brick samples, the first is the extrusion with dimensions (2.5×4×7.5) cm and the second is the pressing (cylinder shape) with dimensions (3.5×5.5) cm after that dried at room temperature for 48 hr. and for 24 hr. at 110 °C using the laboratory oven. After the drying process, the samples will burn at different temperatures (750, 800, 850 and 1100) °C according to burning program for 2 hr. in muffle furnace, The results appear that extruded samples at 800 °C is successful because conform to the requirements of Iraqi standards specification No.25, 1993.

Structurae ne peut pas vous offrir cette publication en texte intégral pour l'instant. Le texte intégral est accessible chez l'éditeur. DOI: 10.1088/1757-899x/870/1/012088.
  • Informations
    sur cette fiche
  • Reference-ID
    10675159
  • Publié(e) le:
    12.06.2022
  • Modifié(e) le:
    12.06.2022
 
Structurae coopère avec
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine