Plastic Capacity of Bolted RHS Flange-Plate Joints under Axial Tension
Auteur(s): |
Andrej Mudrov
Gintas Šaučiuvėnas Antanas Šapalas Ivar Talvik |
---|---|
Médium: | article de revue |
Langue(s): | anglais |
Publié dans: | Engineering Structures and Technologies, septembre 2016, n. 3, v. 8 |
Page(s): | 85-93 |
DOI: | 10.3846/2029882x.2016.1216806 |
Abstrait: |
This article considers the calculation of load-bearing capacity of flange-plate joints with bolts along two sides of rectangular hollow sections (RHS) under axial tension. It provides a review and comparison of various calculation methodologies for establishing the load-bearing capacity of RHS flange-plate joints, such as suggested in EN 1993-1-8:2005 and STR 2.05.08:2005 as well as those proposed in different countries and by other authors. Common design principles and derived results for load-bearing capacity of flange-plate joints have been analysed and compared. Following the numerical modelling, which has been done using ANSYS Workbench finite element program, the derived results for load-bearing capacity have been compared with analytical load-bearing capacity results for flange-plate joints of the same structure. The analysis has focused on one type of flange-plate joints with bolts – both preloaded and non-preloaded – along two opposite sides of the tube, with the flange thickness of 15 mm and 25 mm. |
- Informations
sur cette fiche - Reference-ID
10325957 - Publié(e) le:
21.07.2019 - Modifié(e) le:
21.07.2019