Physicomechanical Behavior of High-Performance Concrete Reinforced with Recycled Steel Fibers from Twisted Cables in the Brittle State—Experimentation and Statistics

This research studied the effect of recycled steel fibers extracted from twisted cable waste on the fresh and hardened states of high-performance concretes. Accordingly, slump, water absorption (WA), compressive strength (CS), flexural strength (FS), and split tensile strength (STS) were measured in the laboratory using mixtures generated by the response surface methodology (RSM). The RSM-based central composite design (CCD) was used to assess the influence of water-to-binder (W/B) ratios from 0.27 to 0.31, length-to-diameter (L/d = 46 to 80) and steel fiber content (SFC) in the range of 19 to 29 kg/m³ on the behavior of high-performance fiber-reinforced concrete (HPFRC). The accuracy and validation of the generated models were evaluated by employing analysis of variance (ANOVA) and optimal parameters. The experimental findings revealed that the use of an L/d ratio of 63, a W/B ratio of approximately 0.28, and an SFC of around 22 kg/m³ resulted in high workability in terms of slump. While a notable increase in compressive strength was observed when employing an L/d ratio of approximately 70, a W/B ratio of around 0.28, and the maximum SFC of 29 kg/m³, as confirmed by scanning electron microscopy (SEM) and X-ray diffraction (XRD) analysis.

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.