Physical, Mechanical and Transfer Properties at the Steel-Concrete Interface: A Review

The steel-concrete interface (SCI) is extensively acknowledged to affect the durability of reinforced concrete. The main objective of this paper is to conduct a state-of-the-art review that contributes to sufficient knowledge on the determination of the SCI properties and its effect on the overall performance of reinforced concrete elements. The physical characteristics at the SCI are influenced by segregation, flow, hydration, and drying shrinkage of concrete, hence affecting the presence of voids and cracks within this interface. The bond strength is one of the measures of the SCI and this is conducted through pull-out, push-in, and tie-beam testing. It was shown that the rebar shape and diameter, the anchorage length, the concrete grade strength, binder type (geopolymer concrete), and the distribution of aggregates have a significant effect on the interface properties and behavior, where geopolymer concrete offered improved bond behavior over conventional concrete. Various studies have demonstrated that the presence of the steel-concrete interface and the application of mechanical stresses contribute to the flow transfer (inflow/outflow) through the reinforced concrete structure. Some of these studies focused on the initial state of the SCI within the structure, and some conducted tests with shear loading on the SCI. Regarding the transfer properties at the SCI, it was shown that the presence of steel rebar, crack dimensions, degree of saturation of concrete, and the concrete mix design, influence the permeability of the concrete, specifically at the vicinity of the SCI, because of the development of micro-cracks at the interface. In other studies, the shear stresses were also found to affect the transfer properties through the SCI. Researchers have implemented several software solutions such as finite element models on ABAQUS and mesoscale numerical simulations and have used machine learning models that predict and verify the effects of bond failure behavior at the SCI. Good agreement was established between the numerical and actual experimental results. The influence of different exposure conditions on the steel-concrete interface that change throughout time needs to be dealt with, which includes moisture-related environmental conditions, variation in temperature, and chemical exposure. Furthermore, the influence of structural loading, such as “creep effect”, deterioration (ageing) of material must be studied at the interface. The studies were limited to short_term behavior.

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.