Performance of concrete with the incorporation of waste from the process of stoning and polishing of glass as partial replacement of cement

The incorporation of waste glass as a partial replacement for cement in concrete can provide an alternative destination for the waste, reduce the consumption of cement (minimizing CO₂ emissions and consumption of natural resources), and improve the concrete performance. Thus, this research evaluated the performance of concrete incorporating waste glass sludge (GS), resulting from the process of stoning and polishing of soda-lime flat glass, as a supplementary cementing material. Mechanical strength and durability properties were assessed through compressive strength, alkali-silica reactivity, electrical resistivity and chloride permeability, diffusivity and migration tests. Mixtures containing metakaolin (ME) were also evaluated. The results indicated that the use of the waste ground to an adequate size can replace up to 20% of cement. At this content, it caused a reduction of chloride penetration of over 80%, reduced ASR and conserved compressive strength. The combination of waste with metakaolin replacing 20% of cement also improved all the concrete properties, increasing the compressive strength up to 12% at 28 days.

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.