0
  • DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

Perceived Air Quality and Productivity in the Office Building

Auteur(s):
Médium: article de revue
Langue(s): anglais
Publié dans: IOP Conference Series: Materials Science and Engineering, , n. 4, v. 960
Page(s): 042088
DOI: 10.1088/1757-899x/960/4/042088
Abstrait:

Problems of perceived quality of the environment find its reason especially when monitoring performance and productivity of work. Thus, verification of the degree of environmental quality impact on employee performance comes into consideration. The results of two independent studies involving 50 subjects, and using similar procedures and blind exposures have shown that increasing the air quality (by decreasing the pollution load or by increasing the ventilation rate, with otherwise constant indoor climate conditions) can improve the performance of simulated office work (text typing, addition and proof-reading). Performance testing was performed in the open space office of an office building at three air exchange intensities: n1 = 0.5 h−1, n2 = 1.5 h−1 and n3 = 2.5 h−1. Other physical environmental parameters that could have affected the assessors’ performance were maintained in the range: indoor air temperature θai = 22 - 24 °C, relative air humidity φai = 40 - 60%, air velocity vai ≤ 0.25 m.s−1, noise level load L = 40 - 50 dB (A), daylight - diffuse radiation component. The present results document the productivity benefits of providing good indoor air quality and indicate that providing indoor air of a higher ventilation level will increase productivity.

Structurae ne peut pas vous offrir cette publication en texte intégral pour l'instant. Le texte intégral est accessible chez l'éditeur. DOI: 10.1088/1757-899x/960/4/042088.
  • Informations
    sur cette fiche
  • Reference-ID
    10674958
  • Publié(e) le:
    14.06.2022
  • Modifié(e) le:
    14.06.2022
 
Structurae coopère avec
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine