0
  • DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

Penetration Form of Inter-Hole Cracks under Double-Hole Blasting Conditions with Inclined Fissures

Auteur(s):





Médium: article de revue
Langue(s): anglais
Publié dans: Advances in Civil Engineering, , v. 2021
Page(s): 1-13
DOI: 10.1155/2021/6677595
Abstrait:

During blasting construction in tunnel engineering, an inclined fissure near the blast hole produces the “Z” type of over-excavation and subsequently affects the overall blasting effect and stability of the tunnel. In this work, dynamic caustics testing was used to study the burst propagation mode and penetration form of explosive cracks at different positions between holes under double-hole blasting conditions. Results showed that the existence of gently inclined cracks changed the propagation law of explosive stress wave. The dominant fracture surface was formed in the vertical direction between the borehole and the fracture. Finally, the crack penetrates to form “Z”-type over-excavation, which was analyzed by the dynamic caustics test. The expansion velocity of the burst crack reached the maximum under the reflection of the explosion stress wave and then decreased with the attenuation of the stress wave intensity. The peak propagation velocity decreased with the increasing vertical distance between the prefabricated fracture and the borehole, and the stress intensity factor at the crack tip immediately reached its peak value after detonation, and the oscillation then decreased. These research results can serve a basis for reducing tunnel blasting over-excavation under this condition and optimizing blasting parameters.

Copyright: © Shiwei Shen et al.
License:

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.

  • Informations
    sur cette fiche
  • Reference-ID
    10560659
  • Publié(e) le:
    03.02.2021
  • Modifié(e) le:
    02.06.2021
 
Structurae coopère avec
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine