Optimization of Shear Resistance in Precast Concrete Sandwich Wall Panels Using an S-Type Shear Connector

Precast concrete sandwich wall panels (PCSPs) are popular for building exteriors due to their high thermal efficiency, composite performance, and low manufacturing and maintenance costs. Researchers have investigated the possibility of reducing the panel thickness while maintaining the cladding components’ thermal efficiency and strength to further improve efficiency and to reduce material consumption. However, limited research has been conducted on the shear bonding of steel plates, which is critical to ensuring durability and energy efficiency. This study investigated the shear behaviour of PCSPs with an S-type shear connector (SSC) through nine push-off tests and non-linear finite element modelling using Abaqus. Parametric studies were carried out to investigate the influence of the geometric properties of the SSC, the yield strength of the steel and the insulation thickness. The results suggest that the maximum secant stiffness for SSCs was achieved at a width of 101.4 mm and a thickness of 2 mm. Therefore, it is recommended that the width of the SSCs be limited to this value or less. Furthermore, the study found that increasing the yield strength of the steel beyond a thickness of 2 mm and a width of 101.4 mm did not improve the results and had a negative impact on the secant stiffness of the SSCs.

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.