Numerical Study Regarding the Seismic Response of a Moment-Resisting (MR) Reinforced Concrete (RC) Frame Structure with Reduced Cross-Sections of the RC Slabs

In the first part of the current study, the effectiveness of the transversal cross-section reduction method for RC beams in marginal areas (by means of mechanical drilling) was validated. The said method “encourages” the formation of plastic hinges at the beam ends and, at the same time, allows for taking into account the bending stiffness of RC slabs, which is exerted upon the RC beams. In these conditions, the second part of the current research study (i.e., the current manuscript) highlights the real mode of reducing the lateral stiffness of the slabs upon the RC beams. These elements form a common body, together with the beam–column frame node. The same method as in the first part of the study—“weakening” the plates in the corner area through vertical drilling, without affecting the integrity of the reinforcing elements—was used. The analytical MR RC frame model, studied by means of the comparative method, highlights the efficiency of the transversal cross-section reduction method for RC slabs. Basically, the directing of the plastic deformations from the weakened slab areas towards the marginal areas of the reinforced concrete beams takes place. The beams rotate as far as the weakened slab areas allow its plastic deformation, thus being possible to observe the partial conservation effect of the beam–column frame joint. Furthermore, for the analytical model with the maximum number of vertical holes in the corner areas of the concrete plate, minimal plastic deformations are recorded for the marginal areas of the concrete columns. A partial conservation of the formation mechanism of the “beam-slab-frame node” common rigid block is also noted. Consequently, the dissipation of the seismic energy is made in a partially controlled and directed manner, in the “desired” areas, according to the “Strong Columns—Weak Beams” (SCWB) ductile mechanism of the lateral behavior to seismic actions for reinforced concrete frame structures. The mechanism is specified in current design norms for RC frame systems. The effectiveness of the method for reducing the transversal section of the RC plates in the corner areas by means of transversal drilling is highlighted and validated from the perspective of the local and global ductile seismic response of reinforced concrete frame structures. A significant reduction in the bending stiffness of the slabs upon the beams and a real development of the plastic hinges in the marginal areas of the beams (together with partial implications and plastic deformations) were observed.

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.