A Numerical Study of Reinforcement Structure in Shaft Construction Using Vertical Shaft Sinking Machine (VSM)

Using the Vertical Shaft Sinking Machine (VSM) for shaft construction is an emerging modern technology, which is also currently one of the most advanced techniques in the field of shaft sinking. Current research on VSM technology primarily focuses on mechanical and technical issues, neglecting the impact of the construction on the surrounding soil and the structure itself. This oversight leaves structural design lacking a reliable foundation. Additionally, there is insufficient information on the role of reinforcement design during construction in soft soils. These engineering challenges have hindered the widespread implementation of this new technology. Therefore, a series of numerical models were used to analyse the mechanical behaviour of shaft and soil during or after the sinking process, with the aim of addressing these gaps by investigating the influence of shafts constructed using VSM technology, and providing a scientific basis for reinforcement design in soft soil. The case study shows that increasing the soil-cement strength does not have a significant effect on the overall deformation of the soil surrounding the shaft, but leads to a notable reduction in the plastic zone volume, subsequently enhancing the overall stability of the neighbouring soil. The ring bottom beam design effectively reduces convergence deformation by about 50%, while also improving the horizontal internal force distribution near the cutting edge. However, this approach significantly escalates local vertical bending moments, necessitating thorough consideration in the design stage.

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.