0
  • DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

Numerical simulation and dynamic experimental investigation on vibration control of a structural system with a stacked single particle‐inerter damper

Auteur(s):
ORCID


Médium: article de revue
Langue(s): anglais
Publié dans: Earthquake Engineering and Structural Dynamics, , n. 11, v. 53
Page(s): 3649-3677
DOI: 10.1002/eqe.4191
Abstrait:

To overcome the deficiencies of large particle radius, strict vibration conditions, and low kinetic energy exchange rate of traditional particle dampers, it is proposed to organically combine the rack and pinion inerter device with a stacked single particle damper (SSPD) to form a novel stacked single particle‐inerter damping system (SSPIS). Based on a detailed analysis of the force state of particles at various stages, the vibration damping mechanism of SSPIS is analyzed, and a mechanical model of a single‐degree‐of‐freedom (SDOF) structure equipped with an SSPIS is established. The numerical simulation and analysis process of SSPIS is provided, and a parametric design method of inerter device based on the structural performance requirements is proposed. The accuracy of the theoretical mechanical model and numerical simulation analysis process of SSPIS is verified through shaking table tests of a single‐story steel frame, and the actual damping control effect of SSPIS on the controlled structure is investigated. Both test and theoretical results show that the numerical simulation analysis process of SSPIS is clear and accurate, and the mechanical model of the SSPIS‐SDOF structural system is highly accurate. The inerter device in SSPIS can significantly improve the momentum exchange efficiency between particles and structures, and SSPIS could adaptively adjust the particle radius size on demand compared with the traditional particle dampers, with a high damping frequency band, and can realize good damping control effect under the earthquake with various types of sites, which has expansive engineering application scenarios.

Structurae ne peut pas vous offrir cette publication en texte intégral pour l'instant. Le texte intégral est accessible chez l'éditeur. DOI: 10.1002/eqe.4191.
  • Informations
    sur cette fiche
  • Reference-ID
    10791704
  • Publié(e) le:
    01.09.2024
  • Modifié(e) le:
    01.09.2024
 
Structurae coopère avec
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine