Numerical Investigations of Wind Loads on Spherical Structures with Various Types of Configurations

Spherical structures with various design styles are encountered in engineering. Most studies have only examined the wind loads on hemispheres or smaller, which leads to a lack of wind-resistant design rules that cover all the styles of a spherical structure. In this study, a validated CFD model was used to systematically examine the wind loads on spherical structures with different apex-height-to-diameter ratios (ARs). The structure types ranged from different truncated spheres to whole spheres located at different distances above the ground. The results indicated that the largest positive mean pressure coefficient (Cp) at the windward surface gradually increased with AR. The structures were subjected to a strong suction effect at the crown of the sphere as well as its two sides and bottom. A polynomial approximation function for area-averaged Cp over the top area was derived to quickly determine the largest suction effect for all types of spherical structures. The drag and lift coefficients increased rapidly with AR and achieved their largest value when the structure was close to a whole sphere, while their changes were small for a whole sphere located far from the ground. Design suggestions were provided based on the results.

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.