Numerical and experimental analysis in seismic performance of post-earthquake reinforced concrete frame retrofitted with ECC

In order to further demonstrate the effectiveness of engineered cementitious composites (ECC) in repairing and strengthening the post-earthquake damaged structure, at the overall structural level, experimental and numerical comparative analysis of structural seismic performance before and after “retrofitted with ECC” is conducted in this paper. A 1:2-scale reinforced concrete frame is tested under cyclic reversed loading and a new ECC material’s constitutive model is proposed in this paper for improving the accuracy and feasibility of numerical modelling. The modelling method and newly proposed constitutive model of ECC has been demonstrated to be workable and accurate. Based on numerical and experimental data, the increase of the average yielding displacement after the installation of ECC is relatively significant (80.4% to 156.4%), and the repairing method using ECC in post-earthquake damaged RC frame can restore and even exceed the original frame’s load bearing capacity. Comparing the ultimate inter-story drift ratio, the ratio with ECC is about 31.0% higher, indicating that ECC has good deformation capacity and the usage of ECC is indeed an effective method to improve deformation capacity in repairing and strengthening post-earthquake damaged structures. The results confirm the effectiveness and superiority of retrofitting ECC in post-earthquake damaged structures for the reason that the repaired structure can reach the same level of seismic performance as the original structure. The “repairable” characteristic can be used in the design of earthquake resilient structures.