0
  • DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

Non-linear analysis of statically indeterminate SFRC columns

Auteur(s):


Médium: article de revue
Langue(s): anglais
Publié dans: Structural Concrete, , n. 1, v. 15
Page(s): 94-105
DOI: 10.1002/suco.201300004
Abstrait:

The structural behaviour of steel fibre-reinforced concrete (SFRC) has been studied using non-linear finite element analysis (NLFEA) and ABAQUS software. An interesting feature of this work is the consideration of statically indeterminate SFRC columns. Most of the SFRC specimens studied in the literature are simply supported beams, and information on statically indeterminate columns is sparse. In addition, both axial and lateral loads were considered in order to allow for compression and flexural effects on the columns. The aim of the work was to examine the potential for using steel fibres to reduce the amount of conventional transverse steel reinforcement without compromising ductility and strength requirements. To achieve this, the spacing between shear links was increased while steel fibres were added as a substitute (spacing between shear links increased by 50 and 100 % with fibre volume fraction Vf increased to Vf = 1, 1.5, 2 and 2.5 %). The numerical model was carefully calibrated against existing experimental data to ensure the reliability of its predictions. Parametric studies were subsequently carried out, which provided insight into how the steel fibres can help reduce the number of conventional shear links.

Disponible chez: Voir chez l'éditeur
Structurae ne peut pas vous offrir cette publication en texte intégral pour l'instant. Le texte intégral est accessible chez l'éditeur. DOI: 10.1002/suco.201300004.
  • Informations
    sur cette fiche
  • Reference-ID
    10069838
  • Publié(e) le:
    11.03.2014
  • Modifié(e) le:
    13.08.2014
 
Structurae coopère avec
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine