0
  • DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

A new constitutive model of shape memory alloy and its seismic mitigation capacity compared with existing models

Auteur(s):
ORCID


Médium: article de revue
Langue(s): anglais
Publié dans: Advances in Structural Engineering, , n. 5, v. 27
Page(s): 835-853
DOI: 10.1177/13694332241237580
Abstrait:

The existing constitutive models of shape memory alloy (SMA) cannot accurately describe the mechanical behavior in martensitic strengthening segment since their loading and unloading paths in strengthening segment completely overlap. This study proposes a multi-segment linear mathematical model for SMA, which realizes the separation of loading path and unloading path in strengthening segment. A four-story steel frame structure and corresponding braced structures with various SMA constitutive models are designed, and seismic control effects of SMA braces with these models are analyzed and compared through time history analysis. The results show that the sub-cycle unloading mode of SMA constitutive model affects the seismic mitigation capacity of SMA brace in a certain extent. The position of the inflection point of unloading path has very little influence on the structural control ability of SMA braces. The SMA brace using the SMA constitutive model with a single linear sub-cyclic unloading path has the minimal seismic response and the highest seismic reduction ratio. For most evaluation indexes, the seismic mitigation ability calculated by the proposed path separation constitutive model is in the middle of the results calculated by the existing models. SMA models without considering the mechanical behavior of strengthening segment may lead to an erroneous estimation of the energy consumption of SMA brace and the structural damage. The difference of simulation results among various SMA constitutive models is almost independent with ground motion.

Structurae ne peut pas vous offrir cette publication en texte intégral pour l'instant. Le texte intégral est accessible chez l'éditeur. DOI: 10.1177/13694332241237580.
  • Informations
    sur cette fiche
  • Reference-ID
    10770277
  • Publié(e) le:
    29.04.2024
  • Modifié(e) le:
    29.04.2024
 
Structurae coopère avec
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine