Multi-Point Optical Flow Cable Force Measurement Method Based on Euler Motion Magnification

This study introduces a multi-point optical flow cable force measurement method based on Euler motion amplification to address challenges in accurately measuring cable displacement under small displacement conditions and mitigating background interference in complex environments. The proposed method combines phase-based magnification with an optical flow method to enhance small displacement features and improve SNR (signal-to-noise ratio) in cable displacement tracking. By leveraging magnified motion data and integrating auxiliary feature points, the approach compensates for equipment-induced vibrations and background noise, allowing for precise cable displacement measurement and the identification of vibration modes. The methodology was validated using a scaled model of a cable net structure. The results demonstrate the method’s effectiveness, achieving a significantly higher SNR (e.g., from 7.5 dB to 22.24 dB) compared to traditional optical flow techniques. Vibration frequency errors were reduced from 6.2% to 1.5%, and cable force errors decreased from 11.38% to 3.13%. The multi-point optical flow cable force measurement method based on Euler motion magnification provides a practical and reliable solution for non-contact cable force measurement, offering potential applications in structural health monitoring and the maintenance of bridges and high-altitude structures.

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.