• DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

Microscopic Texture of Polypropylene Fiber-Reinforced Concrete with X-Ray Computed Tomography

Auteur(s):




Médium: article de revue
Langue(s): en 
Publié dans: Advances in Civil Engineering, , v. 2019
Page(s): 1-9
DOI: 10.1155/2019/2386590
Abstrait:

Polypropylene fiber-reinforced concrete (PFRC) is a cement-based composite material with short_cut fibers which has been utilized to provide multidimensional reinforcement and enhance toughness of concrete. However, this improvement is closely related to the microstructural morphology of the concrete. A nondestructive technique using X-ray computed tomography (CT) was therefore used to grasp the microscopic texture of PFRC samples. The results showed that the orientation of microcracks, which appear in the interfacial transition zone, are along the surface of the coarse aggregate. The range of distribution of fibers is proportional to fiber volume fraction. The coarse aggregate influence distribution and orientation of polypropylene fibers whose shape are mainly fold line and curve. The dispersion of pores with small volume is uniform, and the distance between the pores with larger volume is short. The proportion of pores with the diameter in the range 0∼199 μm exceeds 70%, of which the sum of volume exceeds a half of total volume with the amount being about 1% of total amount.

Copyright: © 2019 Yu Qin et al. et al.
License:

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.

Publicité

  • Informations
    sur cette fiche
  • Reference-ID
    10403255
  • Publié(e) le:
    28.12.2019
  • Modifié(e) le:
    28.12.2019