Microscopic Mechanism and Reagent Activation of Waste Glass Powder for Solidifying Soil

Glass waste products represent a significant environmental concern, with an estimated 1.4 billion tons being landfilled globally and 200 million tons annually. This results in a significant use of land resources. Therefore, it would be highly advantageous to develop a new method for disposing of waste glass. Waste glass can be recycled and ground into waste glass powder (WGP) for use in solidified soil applications as a sustainable resource. This study is based on solidified soil research, wherein NaOH, Ca(OH)2, and Na2SO4 were incorporated as activators to enhance the reactivity of WGP. The optimal solidified soil group was determined based on unconfined compressive strength tests, which involved varying the activator concentrations and WGP content in combination with cement. X-ray diffraction (XRD) was used to study the composition of solidified soil samples. Microscopic pore characteristics were investigated using scanning electron microscopy (SEM), and the Image J software was employed to quantify the number and size of pores. Fourier-transform infrared spectroscopy (FTIR) was employed to examine the activation effect of waste glass powder. This study investigated the solidification mechanism and porosity changes. The results demonstrate that the addition of activated WGP to solidified soil enhances its strength, with a notable 12% increase in strength achieved using a 6% Ca(OH)2 solution. The use of 2% concentration of Na2SO4 and NaOH also shows an increase in strength of 7.6% and 8.6%, respectively, compared to the sample without WGP. The XRD and SEM analyses indicate that activated WGP enhances the content of hydrates, reduces porosity, and fosters the formation of a more densely packed solidified soil structure.

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.