Mechanical Response and Anti-Reflective Crack Design in New Asphalt Overlays on Existing Asphalt Overlaying Composite Portland Cement Pavement

A detection and evaluation system containing a two-level index of structural integrity and bearing capacity was constructed based on ground-penetrating radar (GPR) and a falling weight deflector (FWD). This system was constructed to solve problems with the detection, evaluation, and structural and material design of asphalt rehabilitation for the prevention and control of asphalt reflection cracks in asphalt overlaying composite Portland cement pavement. Based on the detected data from the GPR and FWD, the reasonable and recommended thickness range of the stress-absorbing layer was determined by the finite element method, and the optimization design of an anti-reflective crack structure is proposed. Furthermore, a material design and engineering application of the stress-absorbing layer was carried out. The results show that an additional 10 cm layer of repaved asphalt can reduce temperature stress by 64.1%, reduce fatigue stress by 29.3% at the cement slab bottom, and extend the service life by 23.1 years. The reasonable thickness of the stress-absorbing layer ranges from 1.6 cm to 2.0 cm, and the recommended structural combination design is a 4 cm SMA-13 upper layer, a 4 cm AC-16 lower layer, and a 2 cm stress-absorbing layer overlaying existing asphalt overlay. The impact toughness of the designed stress-absorbing layer is 1.05 times and 1.44 times that of the other stress-absorbing layer and the AC-16 asphalt mixture, respectively, which have been successfully used for more than 5 years. The recommended design rehabilitation has good engineering application. The uniformity of the stress-absorbing layer can reach 63%, and an anti-reflective crack effect is expected. The results of this study provide design methodology and experience for composite pavement repaving.

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.