0
  • DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

Mechanical Properties of Steel Fiber-Reinforced Magnesium Phosphate Cement Mortar

Auteur(s):




Médium: article de revue
Langue(s): anglais
Publié dans: Advances in Civil Engineering, , v. 2018
Page(s): 1-11
DOI: 10.1155/2018/3978318
Abstrait:

A new cement-based mortar with high early strength and toughness was developed by adding micro steel fibers (MSF) in magnesium phosphate cement (MPC) mortar. The compressive and flexural tests were carried out to investigate the effect of curing time, MSF volume fraction, sand-cement mass ratio, and water-cement mass ratio on the strength and flexural toughness of MSF-reinforced MPC mortar (MSFRMM). Also, the flexural toughness and ductility of MSFRMM were evaluated according to ASTM C1609. The results of this study showed that the addition of MSF from 0% to 1.6% by volume significantly improved the compressive strength of MSFRMM. The MSFRMM showed high early strength, especially during the first 3 days. The addition of MSFs changed the flexural failure mode of MPC-based mortar from brittleness to ductility, and the flexural toughness of MSFRMM remarkably increased with the increase of MSF volume fraction from 0% to 1.6%. The toughness and ductility of MSFRMM slightly increased with the increase of the dosage of cement. The toughness and ductility of MSFRMM increased with the decrease of the water-cement mass ratio due to the improved density of the mortar caused by the reduction of water.

Copyright: © 2018 Hu Feng et al.
License:

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.

  • Informations
    sur cette fiche
  • Reference-ID
    10176780
  • Publié(e) le:
    30.11.2018
  • Modifié(e) le:
    02.06.2021
 
Structurae coopère avec
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine