Mechanical Characteristics and Failure Mechanism of Siltstone with Different Joint Thickness

The mechanics of rock mass is significantly affected by joints, but many existing studies of jointed rocks make simplifications that do not consider the joint thickness. To further study the influence of joint thickness on rock mechanics (mechanical properties, failure mechanism, damage model, etc.), we fabricated jointed siltstone specimens with different joint thickness (5, 10, 15, and 20 mm) and the specimens were subjected to uniaxial compression tests. The effects of joint thickness on the uniaxial compression strength (UCS), the strain at UCS, the elastic modulus, and the stress-strain curves were thus analyzed. For the stress-strain curve, with rising joint thickness, the upper concave in the initial compression stage intensified, the slope of the stress-strain in the elastic stage decreased, and the sudden stress drop after peak strength became more obvious. Both the peak compression strength and the elastic modulus gradually decreased with rising joint thickness, but a positive correlation was found between the strain at UCS and the joint thickness.

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.