0
  • DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

Measurement of Apparent Building Damage by Using a Single Image

Auteur(s): ORCID
ORCID
ORCID
Médium: article de revue
Langue(s): anglais
Publié dans: Advances in Civil Engineering, , v. 2021
Page(s): 1-9
DOI: 10.1155/2021/6191755
Abstrait:

In the proposed detection method, a single image was used for the rapid quantitative measurement of the damage area of a building. By using cross-ratio invariability between real and image coordinates, the damage area and the side lengths of the selected region were measured using the vanishing point, the vanishing line, and a line segment with a known length. Perspective transformation and image binarisation were performed on the selected frame to convert the length into area information. The damage area was obtained rapidly from the proportion of pixels in the damage region to pixels in the selected region. Corner detection and subpixel methods were combined to determine measurement errors because of the selection of measurement points. The experimental results from the example test revealed that quantitative area measurement of surface damage on buildings could be realised using the proposed method.

Copyright: © Junda Lyu et al.
License:

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.

  • Informations
    sur cette fiche
  • Reference-ID
    10630586
  • Publié(e) le:
    01.10.2021
  • Modifié(e) le:
    17.02.2022
 
Structurae coopère avec
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine