Maintenance Approaches Using 3D Scanning Point Cloud Visualization, and BIM+ Data Management: A Case Study of Dahei Mountain Buildings

This study investigates the utilization of 3D laser scanning, GPS, BIM and GIS technologies for safeguarding historical wooden structures. As a case study, it focuses on two historic Chinese wooden buildings, the Guanyin Pavilion and Tangwang Palace, renowned for their exceptional historical significance and intricate timber architecture. The Guanyin Pavilion was subjected to high-precision modeling and tilt monitoring, which found that certain columns had a maximum tilt angle of 0.7892°. Additionally, a general tilt tendency was seen across various structural elements. The measurements from the point cloud data exhibited an error range of ±10 mm. However, the relative errors in smaller components approached 2.5%, which necessitated regular verification through human measurements. Using GIS and BIM technology in Tangwang Palace facilitated the meticulous documentation and dynamic supervision of architectural components, encompassing historical development and present state. The maintenance records revealed persistent problems with the roof tiles and wooden beams, exposing structural vulnerabilities. During various maintenance intervals, it was observed that the roof tiles were frequently loose and separated, indicating potential flaws in the design or materials used. The application of these modern technologies enhances the effectiveness and precision of conservation efforts and provides a robust scientific foundation for the continuous monitoring and study of cultural heritage.

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.