0
  • DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

Lateral-distortional buckling of continuous steel-concrete composite beam

Auteur(s):



Médium: article de revue
Langue(s): anglais
Publié dans: Revista IBRACON de Estruturas e Materiais, , n. 4, v. 11
Page(s): 719-756
DOI: 10.1590/s1983-41952018000400006
Abstrait:

In hogging bending moment regions of continuous composite beams the collapse by lateral-distortional buckling (LDB) can occur. The design against LDB according to ABNT NBR 8800:2008 begins with the determination of the elastic critical moment, which depends, among other factors, of the distribution of the bending moment in the analyzed span, taken into account in the formulation through the modification parameter Cdist. To assess the analytical formulations prescribed by ABNT NBR 8800:2008, numerical FE models that simulate the LDB behavior of continuous steel-concrete composite beams were developed in this paper. The different boundary conditions presented in ABNT NBR 8800:2008 were checked using two different models: a simplified model, with a single simply supported span; and models with multiple internal supports and more than one span. It was observed that the Cdist values prescribed by ABNT NBR 8800:2008 can be unsafe, and therefore new values for Cdist are proposed in this paper.

Structurae ne peut pas vous offrir cette publication en texte intégral pour l'instant. Le texte intégral est accessible chez l'éditeur. DOI: 10.1590/s1983-41952018000400006.
  • Informations
    sur cette fiche
  • Reference-ID
    10413260
  • Publié(e) le:
    12.02.2020
  • Modifié(e) le:
    12.02.2020
 
Structurae coopère avec
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine