Investigation on Flexural Performance of RC Beams Flexurally Strengthened by Side-bonded CFRP Laminates

It is an effective way to improve the flexural behavior of reinforced concrete (RC) members by externally bonded carbon fiber reinforcement polymer (CFRP) laminates on the soffit of the members. However, there is little investigation on flexural performance of RC beam flexurally strengthened by side-bonded FRP laminates. To investigate the flexural behavior of RC beams side-bonded CFRP laminates and the difference of RC beams strengthened by soffit-bonded and side-bonded CFRP laminates, a total of 8 CFRP-strengthened beams and 1 control beam were tested. The experimental results show that: 1) the first crack loads of RC beams strengthened by side-bonded CFRP laminates are much higher than that of RC beams strengthened by soffit-bonded CFRP laminates. The first crack loads of side-bonded CFRP laminates beams improved significantly; 2) Side-bonded and soffit-bonded CFRP laminates have almost the same effect on the flexural stiffness of RC beams strengthened with same quantity of CFRP laminates before tension rebar yielding. However, side-bonded CFRP laminates can affect crack width and crack pattern of the strengthened beams, and the pre-crack stage of RC beam by sidebonded CFRP laminates extended remarkably. 3) different to soffit-bonded CFRP laminates RC beams, side-bonded CFRP laminates cannot improve the first yielding and the ultimate load bearing capacity of RC beams.

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.